Adjustable gate hinge welded onto a post

Adjustable Hinges HGHA292 with a Weld on Washer

Adjustable Hinges with a Weld on Washer.

These Adjustable hinges can be adjusted after the gate has been installed simply use a spanner on the hex nut which even after welded turn you are only welding the washer,There are many ways you can use these hinges, These hinges HGHA292 have a 150 kgs capacity based on top and bottom hinge. A pair consist of one side top and bottom hinge. Passive Zinc coating gives these hinges a life of 15 Years. Ideal to be used with Swing gate motors.   
  Related Products
Gate
Locks
Range of Gate Locks
steel post
Steel
Post
Adjustable Hinge with Weld on Washer
Code - HGHA292
$72.00 per Pair
free delivery
line7
welding a hinge to a gate post
Example of an Weld on Adjustable Hinge
allowing the gate to swing 180 Degs
Adjustable hinges with plate
Adjustable
Hinge with backing plate
Adjustable Hinge
Long neck
Adjustable hinges with weld on washer
Adjustable hinges GUDGEON & TRUNNION HINGE
Adjustable Hinge
GUDGEON & TRUNNION HINGE
24mm adjustable gate hinge
250 kgs adjustable gate hinge
45
mm
  96mm 
  35mm 
  48mm 
24mm Adjustable with rotating washer weldon
Cap. 250 kgs
65
mm 
arrow7
Diameter2
24mm Thread Bar Dia
  50mm 
Diameter1
  65mm 
Rotating Washer
Weldon
Weld on adjustable hinge with weld on washer to a steel post
requires a 38mm hole in gate post.
Thread Dia 24mm 
Gates up to 250 kgs

*Pair is Top and Bottom
One Side
Delivering
Australia-wide
and WorldWide
Delivering
Around Australia Daily
deliveryman
dhl logo
Australian Post
tnt logo