4 x 3M lengths Floor Track - Total 12M
Guild Roller and Bracket
50mm Gate Holder
60mm Internal Sliding gate wheel x 2
Now included in this Kit
Floor Track Nails
Sliding Gate Component Kit with 60mm Wheels - $287.00
4 x 3 Mtrs of Floor Track
1 x Track Joiner
1 x Gate Stopper
1 x Gate Holder
1 x Guide Rollers
2 x 60mm Internal Sliding gate wheels
Buy this kit now
This Kit $ 287.00
Gate Stopper with Base 120mm high
Shipping Weight 0.69kg
Each 3 Metre Length of floor track there are 20 Holes
Floor Track for Sliding Gates - 3mm thick Galvanized Steel
Material - Galvanized Steel able to withhold daily use in high traffic areas, able to accommodate Forklifts and Semi-Trailers all day.
With each 2 lengths we supply a track joiner made from Aluminum and is hollow in case you need to run wire under the track from on side to the other.
Guide Rollers for Sliding Gate
2 of Adjustable Nylon rollers
Mounting Bracket Zinc Plated
Min 15 - Max 60
Sliding Gate Wheel 60 Dia
Rated to carry 180kg
Sliding Gate Holder for Gate up to 50mm Thick
Adjustable Height & Position
Attached at the closing end of the gate
Floor Track Fasterners (ZipFix)
Size 40mm long x 6mm dia
Require a 6mm masonry drill
Track fasteners - Zipfix
Above ground track fasteners simply drill through concrete. Hit the nail forcefully with a hammer and the aluminum sock will expand the track is in place. Only 19c each.
2 Lengths of Floor track have 40 holes for some type of fixing to the concrete.
You can use dynabolts 6mm dia and at bunnings they cost approx 79 cents each and that can cost you $37.92.