Free x 2
60mm external Sliding gate wheel
3 x 3 Mtrs of Floor Track
1 x Track Joiner
1 x Gate Stopper
1 x Gate Holder
1 x Guide Rollers
2 x 60mm Enternal Sliding gate wheels
Buy this kit now
This Kit $ 243.00
Each 3 Metre Length of floor track there are 16 Holes
15 - 60
Guide Rollers for Sliding Gate
2 of Adjustable Nylon rollers
Mounting Bracket Zinc Plated
Floor Track for Sliding Gates - 3mm thick Galvanized Steel
Material - Galvanized Steel able to withhold daily use in high traffic areas, able to accommodate Forklifts and Semi-Trailers all day.
With each 2 lengths we supply a track joiner made from Aluminum and is hollow in case you need to run wire under the track from on side to the other.
Sliding Gate Holder for Gate up to 50mm Thick
Adjustable Height & Position
Attached at the closing end of the gate
60mm Double Bearing wheel
These sliding gate wheels can be bolted under the sliding gate and are ideal for both Steel and timber sliding gates
Try not to weld them try to bolt them or tek screw them to the underside of the bottom of the gate as they will need to be replaced depending on use.
3 x 3M Floor Track -total 9M
Guild Roller and Bracket
2 Lengths of Floor track have 32 holes for some type of fixing to the concrete.
You can use dynabolts 6mm dia and at bunnings they cost approx 79 cents each and that can cost you $37.92.
Size 30mm long x 6mm dia
Require a 6mm masonry drill
Floor Track Fasterners (ZipFix)
Track fasteners - Zipfix
Above ground track fasteners simply drill through concrete. Hit the nail forcefully with a hammer and the aluminum sock will expand the track is in place. Only 19c each.
Free x 32 pcs
60mm External kit
Sliding Gate Component Kit with 60mm Wheels - $243.00
Gate Stopper with Base 120mm high
Shipping Weight 0.69kg